|
|
10"Preformer Drop Saw
|
HiBall 6" Trim Saw
|
|
Gy-Roc Vibrahone (Tumbler)
|
Piggyback Kit
|
|
Gy-Roc Vibrahone Parts
|
Gy-Roc Cabber
|
|
Submersible Pump
|
|
10" Preformer Drop Saw
High speed ( 3400 rpm.), 13 x12 work table, Lift out Coolant Tank, Submersible
Pump,Smooth-Quiet Polyflex belt drive, Rugged cast aluminum, Large Coolant Capacity
The overhead design puts you, the user, in the best position to see and make accurate, precision cuts. High torque 1/4hp motor makes cutting fast and smooth.
Adjustable pivot hinge eliminates all looseness and play for precision alignment. We have personally made 100's of cuts with this saw. We like it!! YOU WILL TOO!!
|
10" Preformer Drop Saw Complete less blade
|
|
10" Preformer Drop Saw Accessories
HiBall 6" Trim Saw
Unmatched Cutting Speed and Precision!
The revolutionary HiBall cuts extremely fast and cool in the hardest agate or gemstones...and with high precision. Sharp reduction in cutting time with reduced
waste. Performance proven since 1980. High torque flat belt drive is smooth and quiet. Comes with a 6 x.012 Pro-Slicer Diamond Blade running at 4200 rpm. 11 x 13
clear work table gives you ample work room. The coolant tank slides out for cleaning. 1/3 hp motor.
Gy-Roc Vibrahone
For Jewelry Finishing or Rock Tumbling these are:
the Fastest!! the Gentlest!! the Easiest to Use!! the Easiest to Clean!! Produce Unequaled Finishes!! Use Less Energy!! Do More Work!!
All models are 2 speed for controlled finishes. Unique upper and lower eccentric weights are adjustable to run heavy loads, like steel shot. Your motor and bearings
last longer because of the belt drive. These machines really do the job...Day in and day out.
|
|
Model A
|
Model B
|
Model C
|
|
Rock Capacity
|
10 lbs.
|
3 lbs.
|
40 lbs.
|
|
Gy-Roc Vibrahone Accessories
PIGGYBACK KIT (for the Model B only)
Here's a real Extra on the Model B. You can double or triple your output by adding
one or two kits. Super Economical too!! In effect, you add a second vibrator for only $18.00, and a third for only $18.00 more. Effective in any configuration. 1,2 or 3 bowls.
Lapping Plate (for the Model A only)
Add this 10" lapping plate to your Model A Gy-Roc vibrating tumbler and double your output. Polish stones in the bowl and flat lap on the plate, all at the same time!!
FLO-THRU SYSTEM
The FLO-THRU SYSTEM for metal finishing is easily added. You simply install a FLO-THRU bowl, which has a drain and attached plastic hose. Now you can
constantly flush the media during the cutdown cycles. Also makes cleanup and rinsing very easy.
|
FLO-THRU BOWL
|
Model A (10lb)
|
Model B (3lb)
|
Model C (40lb)
|
|
RECIRCULATION SYSTEM (for all 3 sizes)
SUSPENSION SPRINGS (for all 3 sizes)
Gy-Roc Vibrahone Parts:
|
Models A, B and C
|
|
Extra Bowl
|
|
Extra Cover
|
|
Drive Belts
|
|
C-High Bowl
|
|
C-High Bowl Holddown
|
|
Motor
|
|
Spyder Assembly
|
|
Gy-Roc Cabber
You get a perfect dome on your cab EVERY TIME with this great device. Mount in front of your coarse grinding wheel.
Cabber, set of 6 different cab heads and a roll of double stick tape.
Gy-Roc Cabber
Set of 6 cab heads - Double stick tape
Submersible Pump
Oil filled, for use with oil or water coolants. 180 gallons per hour
Submersible Pump
Return to Top of Page
|
